JVC KD-R961BT Manuel D'instructions page 19

DISPLAY SETTINGS
KD-R961BT
1
Press and hold
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
OFF: Selects the day adjustments. ; ON: Selects the night adjustments. ;
DIMMER TIME: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Changes between the day and night adjustments when you turn off or
on the car headlights. *
For KD-R961BT, the display and button colors change according to the
settings made on [COLOR].
KD-R864BT / KD-R862BT / KD-R861BT
.
.
1
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and
night separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration on left)
3 Set the brightness level (00 to 31).
SCROLL * 2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
COLOR (for KD-R961BT)
PRESET You can select a color for [ALL ZONE], [ZONE 1], [DISP ZONE], or [ZONE 2]
separately. For [ALL ZONE], you can also select a color pattern.
Default color:
Default: XX
ALL ZONE: [COLOR 06], ZONE 1: [COLOR 06],
DISP ZONE: [COLOR 01], ZONE 2: [COLOR 27]
1 Select a zone for setting. ( Illustration on left)
2 Select a color for the selected zone.
* 1
The illumination control wire connection is required. ( 25)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
* 3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination
color will change to the default color.
(Default: KD-R961BT: DAY: 31 ; NIGHT: 11
KD-R864BT / KD-R862BT / KD-R861BT:
BUTTON ZONE: DAY: 25 ; NIGHT: 09
DISP ZONE: DAY: 31 ; NIGHT: 12)
• COLOR 01 to COLOR 29
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
• GROOVE/ TECHNO/ EMOTION/ RELAX/ SPECTRUM/ SWEEP/
POP: The selected color pattern is shown.*
1
[ALL ZONE] is selected in step .)
3
(Selectable only when
17
ENGLISH