Dometic TEC30EV Instructions De Montage page 19

TEC30EV
2.2 Handling electrical cables
!
WARNING!
• The electrical power supply may only be connected by a qualified
electrician (e.g. according to VDE 0100, Part 721 in Germany).
!
CAUTION!
• Attach and lay the cables so that they cannot be tripped over or
damaged.
A
NOTICE!
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive
materials (metal).
• Do not pull on the cables.
3 Target group for this manual
The instructions in this manual are intended for qualified personnel at workshops
who are familiar with the guidelines and safety precautions to be applied.
4 Scope of delivery
No. in
fig. 1,
Number
page 3
1
2
3
4
5
6
–
EN
Description
1 Generator
1 Internal control panel
1 Silencer
1 Exhaust pipe, 2 m
1 Set mounting brackets for silencer
1 AG 102, changeover relay for making priority circuits
1 Extension cable for internal remote control
Target group for this manual
19