Power Supply; Charging The Battery - geo-FENNEL FL 220HV Mode D'emploi

EN
B

POWER SUPPLY

Both the standard NiMH battery pack and Alkaline batteries can be used.
1) Insert Alkaline batteries into the Alkaline battery box (ensure correct polarity) and mount the battery
box into the instrument.
OR
2) Mount the rechargeable battery box into the instrument.
1)

CHARGING THE BATTERY

Connect the charger with the charging plug of the instrument and the power source. If the charging
LED is red the battery is being charged; if the LED is green the battery is fully charged.
ATTENTION
The rechargeable battery can be charged if it is in the instrument or if it is ouside.
Battery status indication: If the ON/OFF LED flashes the battery has to be recharged.
14
2)
Charging LED