Télécharger Imprimer la page

SilverCrest SSRA 1 Instructions D'utilisation Et Consignes De Sécurité page 45

Publicité

Les langues disponibles

Les langues disponibles

on the robot vacuum cleaner and it will auto-
matically reconnect to the same WI-FI network.
Disconnecting
Disconnecting through the administrator
In the "Robot" menu, select your robot and
swipe left.
Click "Disconnect".
Disconnecting through the robot vacuum
cleaner
Switch on the robot vacuum cleaner and wait
about 30 seconds to determine if the robot
vacuum cleaner connects to the WI-FI network.
If the robot vacuum cleaner is connected to the
network it will remind you with a beep and the
WI-FI indicator on the robot vacuum cleaner
will switch from blinking to steady.
Whilst connected to WI-FI, hold the "Spot
mode / Decrease time" button
vacuum cleaner for approx. 8 seconds until it
beeps twice. The robot vacuum cleaner has
been disconnected from all users. The con-
sumer can then restart the robot vacuum
cleaner and connect to it.
All manuals and user guides at all-guides.com
on the robot
16
Cleaning via app
Auto mode
Select your robot from the "Robot" menu.
Click
to switch to the "Settings" menu.
Select "Auto mode" for the robot to enter this
mode the next time it is started via the app.
Operation via app
GB/IE
45

Publicité

loading