Publicité
Les langues disponibles
Les langues disponibles
Instructions for use
Charging dock
The charging dock should be plugged in and placed against a
wall on level ground, with more than 0.5m (1.6ft) of clearance
on each side, and more than 1m (3.3ft) in front. For the best
experience, when using the mobile app, place the charging
dock in an area with strong WiFi coverage.
Note: Do not place the charging dock in direct sunlight or block the locator beacon;
otherwise, the robot may not be able to return to the charging dock.
Locator
beacon
More than 0.5m (1.6ft)
All manuals and user guides at all-guides.com
More than 0.5m (1.6ft)
More than 1m (3.3ft)
Routine maintenance
Main brush
* Weekly cleaning recommended
1. Turn the robot over then unlatch and remove the main
brush cover.
2. Take out the main brush, remove and clean its bearings.
3. Remove the main brush cap rotating in the unlock direction.
4. Use the supplied main brush cleaning tool to remove any
entangled hair.
5. Re-install the cap and bearing following the lock direction.
6. Re-insert the main brush and replace the brush cover.
Note: Main brush replacement every 6-12 months is recommended.
Alignment mark
Main brush bearing
018
Lock direction
Unlock direction
Main brush cover
Latch
Main brush
Main brush cap
Publicité
