Publicité
Les langues disponibles
Les langues disponibles
Installation
Using the robot
1. Connect the power cable to the charging dock and tidy cables
using the cable channel as necessary.
Note: If the power cable is vertical to the ground, it may get dragged by the robot,
causing the charging dock to be disconnected.
2. Place the charging dock against the wall on a flat surface and
plug it into mains power.
More than 0.5m (1.6ft)
More than 1m (3.3ft)
Note: The charging dock should have more than 0.5m (1.6ft) of clearance on each
side, and more than 1m (3.3ft) in the front.
All manuals and user guides at all-guides.com
More than 0.5m (1.6ft)
3. Turn on and charge
Press and hold the
button to turn on the robot. When the
power indicator lights up, place the robot onto the charging dock
to begin charging. The robot uses a high-performance lithium-ion
rechargeable battery. To maintain peak battery performance,
always keep the robot charged.
Note: The robot will not turn on when the battery is low. Place the robot directly onto
the charging dock to begin charging.
4. Connect to the mobile app. (recommended)
5. Start cleanup
When the battery is fully charged, the power indicator will remain lit.
Press the
button or use the app to start a cleanup.
012
The color of the power
indicator indicates the
battery level.
White: Battery level ≥ 20%
Red: Battery level < 20%
Flashing:
Charging or starting up
Flashing red: Error
Publicité
