Sagem ADR 155C Guide D'installation Et D'utilisation page 35

This screen is also used to:
S activate the common functions of the equipment, such as the synchronization, safety, traffic
information, etc. by clicking on a function in the menu bar; see tree structure of the general
menu,Figure 1-10.
S access the functionalities related to a module in particular (for example, MSP protection in
the case of an ADRIC1.x module): double click on the module to be selected, the selection
arrow is blinking and its specific menu appears; see the tree structure of "card" menus in
Figure 1-10;
S view the own characteristics of a port (connections performed, configuration of connections,
alarm states ...), by selecting the relevant connector.
For each function viewed, the configuration parameters, operating commands, active
parameters and alarm states are grouped together on the same screen, with the various actions
possible being accessible or not by the operator according to his/her clearance level.
The upper edge of the navigator window recalls the equipment IP address, the clearance level
acquired and, if required, the slot concerned.
EQUIPMENT TRANSMISSION
Date and Time Failure hold off/on
time
Inventories
(hardware/Software) Laser
Security
Management
Upload and
Download
Menu "ADR21E120"
Maintenance
Monitoring
Service
Expected Card
Performance :
VC12 Near (#1 to 21)
VC12 Far (# 1 to 21)
Board status
E1 INPUT/OUTPUT ports
No reproduction or communication without the written consent of SAGEM SA
1 - INSTALLATION AND COMMISSIONING
LOGIN
SYNCHRONISATION
Synchronisation
sources
Menu "ADRIC1.x"
Maintenance
Monitoring
Service
Expected Card
Performance :
VC12 Near / VC12 Far
VC3 Near / VC3 Far
RST Near
MST Near / MST Far
Protection
Board status
TR /REC ports
EOW port
AUX port
Figure 1-10 – Menu structure
Installation and User Guide - N56717020101
CROSS- EVENT LOGS
CONNECTION
Clear
Configuration
Refresh
Delete
Convert
Names
Save
modifications
LAN Wizard
Menu "CARTE-MERE"
Menu "ADRLAN1"
Monitoring
Service
Expected Card
VC12 Near (# 1 to 21)
Performance :
VC3 Near / VC3 Far
Board status
ETH port
E1 INPUT/OUTPUT ports
?
About
Help
Maintenance
Monitoring
Performance :
VC12 Far (# 1 to 21)
IP Parameters
Board status
Page A1-27