Using Http Navigator A1; First Commissioning - Sagem ADR 155C Guide D'installation Et D'utilisation

1 - INSTALLATION AND COMMISSIONING
1.4.3 - Using HTTP navigator

1.4.3.1 - First commissioning

S Start the NESCAPE application
S On the Welcome screen, fill in the "Address" field with the IP address of the ADR155C
equipment.
S WARNING : With NESCAPE 4.5, the equipment IP address should include no non-
S The navigator welcome screen "Welcome to the ADR155C's site" appears.
On the first commissioning, the password is empty; click on Apply to access "ADR155C shelf
S
view" screen.
S From that moment, the navigator is operational.
1.4.3.2 - Navigator Presentation
On session opening on the HTTP navigator, the "ADR155C shelf view" represents the
equipment global view, where each slot is marked with a letter, A, B, C, D or M according to
Figure 1-1.
This screen is used to view the equipment status, in particular:
S inconsistencies between configuration and composition: each slot includes the name of the
expected card (top, left) and the name of the inserted card (in the middle, red coloured if
necessary)
S alarmed modules, framed red in the case of a major alarm, yellow for a minor alarm,
S modules configured out of monitoring are represented greyed.
S modules configured out of service include a cross to signal this administrative status.
Installation and User Guide - N56717020101
Page A1-26
No reproduction or communication without the written consent of SAGEM SA
significant '0'. Example: "http://135.11.9.30/" instead of "http://135.11.09.30/"