Configuration Required A1; Parameterizing The Communication Function A1 - Sagem ADR 155C Guide D'installation Et D'utilisation

1 - INSTALLATION AND COMMISSIONING
1.4.1 - Configuration required
The minimum configuration proposed for the operating PC is as follows:
Description
Processor
Memory
Display
Interface
Operating system
Applications
1.4.2 - Parameterizing the communication function
Figure 1-9 presents the available resources and various configurations possible for the
communication function;
)
Connect "COMM" port of the equipment to a "COM" port not used on the PC with VT100
emulation,
)
Power the PC on,
)
Start the Hyper Terminal application
S on the first use, proceed as follows:
connect "COMM" port of the equipment to a "COM" port not used on the PC,
S
S power the PC on,
S select, in succession, from Windows desktop, the Start, Programs, Accessories and
HyperTerminal command buttons,
S choose the icon representative of the HyperTerminal application,
S a description window for the connection appears; give a name for the connection and
validate your choices,
S a new window appears; choose that PC "COM" port which is connected to the
equipment and validate your choice,
S a new window appears; configure the port parameters as indicated below and validate
the programming :
. Bits per second
S
S . Data bits
S . Parity
S . Stop bits
S . Flow control
S save the connection (Save command in the application File menu).
NOTE: On the next opening of "Hyperterminal" application, choosing the connection icon
will be enough to be logged on the equipment.
On the equipment power-up, the operating menu appears.
To exit the "Hyperterminal" application, select Quit command from File menu.
Installation and User Guide - N56717020101
Page A1-22
No reproduction or communication without the written consent of SAGEM SA
Configuration 1
266 MHz Pentium
32 MB
800x600, 256 colours (1024x768 recommended)
Serial RS232 interface
Ethernet 10 base T network card
Windows 95
Hyperterminal for Windows
HTTP navigator: Netscape Communicator 4.5
: 19200,
: 8,
: no parity,
: 1,
: none,
Configuration 2
64 MB
Windows NT4