Sagem ADR 155C Guide D'installation Et D'utilisation page 33

"interface" : interface used to reach the next equipment
"cost" : or "metric", number of hops to reach the destination.
From this screen, it is possible to change the existing routes, to delete them or to create new
ones (the static routing is necessary if FOT155C's are present on the network or for an
interconnection with a contiguous network).
)
Choice "3" : Display of routing information,
This screen is used to view the routing table, to list the dynamic and/or static routes and also the
interface configurations
)
Choice "4" : equipment REBOOT,
This command is used to perform immediate application REBOOT and to restart with the
parameters already stored in the equipment .
)
Choice "5" : Logout
With the parameterization being complete, this command closes the current session.
An automatic session exit is performed after a few minutes of inactivity (time parameterizable
from the manager).
No reproduction or communication without the written consent of SAGEM SA
1 - INSTALLATION AND COMMISSIONING
Installation and User Guide - N56717020101
Page A1-25