Cleaning And Maintenance; Cleaning The Machine - Linea 2000 DOMO Série Mode D'emploi

CLEANING AND MAINTENANCE

CLEANING DUST COLLECTION COMPARTMENTS AND FILTERS
Clean the dust collection compartment and the filters after each use in the following manner:
1
3
6
1. Press the PUSH button to open the dust collection compartment.
2. Remove the dust collection compartment from the machine.
3. Remove the HEPA filter, including holder, from the dust collection compartment.
4. Open the dust collection compartment and remove the primary filter.
5. Empty the dust collection compartment above the dustbin.
6. Rinse the dust collection compartment and the primary filter under running water. Allow
these to dry before replacing them. Clean the HEPA filter with a dust brush.
· If the HEPA filter is dirty, after approximately 30 days of use, it can also be cleaned
under running water. Allow it to dry for replacing it.
· After numerous uses, the filters should be replaced. The maximum duration of the
filters is approximately 24 months.
7. Replace both filters in the dust collection compartment.

CLEANING THE MACHINE

· Clean the side brushes, wheels, sensors and the contacts for charging the battery regularly
with a soft cloth.
· After numerous uses, the side brushes should be replaced. The maximum duration of the
brushes is approximately 12 months. The brushes and the machine are marked with L (left)
and R (right); make sure they match.
· Never submerge the machine in water!
· The sensors may not become wet.
www.domo-elektro.be
2
4 5
7
45
DO7288S