Linea 2000 DOMO Série Mode D'emploi page 41

Off
You can turn off the machine completely by switching off the on switch on the side of the
device while in standby mode.
The machine turns itself off after being in sleep mode for 15 minutes if no timer has been set.
USE WITHOUT REMOTE CONTROL
Press on the on/off touchscreen button for automatic cleaning. The vacuum cleaner will plot
its own path to vacuum the entire area, taking walls, obstacles and stairs into account.
When the machine is finished vacuuming, it will automatically return to the charging station.
It is also possible to allow the machine itself to stop cleaning. To do so, touch the on/off
touchscreen button. Turn the device off with the on switch on the side of the machine.
USE WITH REMOTE CONTROL
Important: when adjusting settings with the remote control, you must aim it at the machine.
1. PLAN: setting the timer
2. HOME: return to the charging station for re-charging
3. ON/OFF: on-off button
4. MODE: select cleaning programme
5. CLK: clock
6. SPOT: local cleaning
1. PLAN: timer
This button allows you to set the timer (at least 30 minutes, at most 23 hours). Vacuuming will
begin automatically when the time set has expired.
For example: It is now 9 AM. You set the timer for 6:30. The vacuum cleaner will begin after 6
hours and 30 minutes, that is, at 3:30 PM.
· Press and hold the PLAN button for 5 seconds.
· The hours on the display will begin to flash. Set the hours by pressing the arrows up and
down. Press the arrow to the right to confirm.
· The minutes on the display will begin to flash. Set the minutes by pressing the arrows up
and down. The minutes can be set at :00 or :30. Press the arrow to the right to confirm.
· Press the ON/OFF button to save the setting.
· You will hear a confirmation: "scheduling confirmed".
The timer is a daily recurring setting. As explained in the example, the vacuum cleaner will
www.domo-elektro.be
1
3
4
5
DO7288S
2
6
41