Linea 2000 DOMO Série Mode D'emploi page 42

begin vacuuming every day at 3:30 PM. The timer can be turned off by resetting it, setting the
time at 00:00. You will hear a confirmation: "no scheduling".
Note: if the vacuum cleaner is turned off with the on switch, the machine will not vacuum at
the time set. When turning it on again with the switch, the timer must be reset.
Note: this setting can only be programmed in standby mode or while the machine is charging.
2. HOME: return to the charging station for re-charging
· If you wish to charge the vacuum cleaner during use, press the HOME button. The vacuum
cleaner will now automatically look for the charging station.
· PLEASE NOTE: it is possible that the vacuum cleaner cannot find the charging station
because there are too many obstacles around the charging station. Make sure that the free
area around the charging station is as large as possible.
· If the battery is empty, the vacuum cleaner will automatically return to the charging
station. The indicator light on the machine will light up red.
3. ON/OFF: on-off button
· Press on the on-off button for automatic cleaning. The vacuum cleaner will plot its own
path to vacuum the entire area, taking walls, obstacles and stairs into account.
4. MODE: select cleaning programme
While vacuuming, you can select from 4 different cleaning programs. First, use the ON/OFF
button to start the vacuum cleaner in automatic cleaning mode. Press the MODE button.
Make sure the remote control is aimed at the machine. If the mode has been changed, you will
hear a short signal.
The mode selected can be read on the display:
· MODE 1: spiral
The vacuum cleaner will move in a spiral formation.
42
DO7288S