Technical Specifications - Festo DGP B Série Notice D'utilisation

DGP(L)−...−B
13

Technical specifications

Size
Medium
Design
Operating pressure
(min. ... max.)
Permitted
temperature range
Mounting position
End position
cushioning
Cushioning length
Theoretical stroke
force (at 6 bar)
Theoretical air
consumption
Permitted work load component vertical to cylinder axis and permitted static slide tilting torques:
depends on type, speed and loading; can be calculated with catalogue specifications
Materials
38
8 12 18
Depending on use:
as cylinder: Compressed air, dried, filtered, lubricated or non−lubricated
as positioning axis: Compressed air, dried, filtered (5 ìm), non−lubricated
Double−acting pneumatic cylinder without piston rod with rigid piston−slide
connection
3.5 ... 2.5 ...
8 bar 8 bar
As desired (recommendation for stroke lengths > 2000 mm and horizontal
mounting: fit the DGP(L)−... with sealing band below)
Elastic
cushioning
16 mm 18 mm 20 mm
30 N 68 N 153 N
0.003 0.006 0.018
Nl 8 Nl Nl
Cylinder profile:
End cover:
Seals, sealing band:
Guide band, reversal:
Guide rail:
Driver:
Dirt wiper:
25 32 40
2 ... 8 bar
− 10 ... + 60 °C
Pneumatic, adjustable
295 N 483 N 754 N
0.034 0.056 0.088
Nl Nl Nl
Al anodized
Al painted
NBR/PU
POM
Al (slide guide), St (roller guide)
St, non−corroding (8/12), Al anodized (18...80)
NBR (8...18, 80), POM (25...63)
50 63 80
1.5 ... 8 bar
30 mm 85 mm
1178 N 1870 N 3016 N
0.137 0.218 0.352
Nl Nl Nl
Festo DGP(L)−...−B 0407f English