Festo DGP B Série Notice D'utilisation page 23

DGP(L)−...−B
5 Conditions of use
Please note
Malfunctions will occur if the device is not used correctly.
S Ensure that the specifications in this chapter are always observed.
S Note the warnings and instructions on the product and in the relevant
operating instructions.
Compare the maximum values specified in
S
these operating instructions with your
actual application (e. g. forces, torques,
temperatures, masses).
The product can only be operated in
accordance with the relevant safety
guidelines if the maximum loading limits
are observed.
Observe the ambient conditions at your location.
S
Corrosive elements in the environment (e. g. ozone) will reduce the service life
of the product.
Please comply with national and local safety laws and regulations.
S
Use the product in its original state. Unauthorized modification is not
S
permitted.
Remove all transport packing such as foils, caps, cardboard.
S
Exceptions: adhesive labels on compressed air ports (danger of dirt entering
the tubing)
The packing is intended for recycling (except for: oiled paper which must be
disposed of ).
Leave the blue plastic cover caps fitted on the end covers. These protect the
S
clamping device of the band system from external influences.
Make sure there is a supply of correctly
S
prepared compressed air (see Technical
specifications").
Festo DGP(L)−...−B 0407f English
[°C] [%]
Fig. 2
LF−... LR−...
Fig. 3
[mbar]
23