Festo DGP B Série Notice D'utilisation page 32

DGP(L)−...−B
Depending on the size of the work mass, the DGP(L)−... will withstand maximum
speeds in accordance with the following diagram.
Fig. 24: The maximum slide speed values as a factor of the centre of gravity r and the work
load m at 6 bar, 20 °C (mounting position: horizontal)
The following centre of gravity distances form the basis of this diagram:
j 8...18
r = 20 mm
m: Work load (fitted above) [kg]
r: Centre of gravity distance [mm]
Fig. 25: Centre of gravity distances
With loadings in excess of the specified maximum values:
Use shock absorbers or fixed stops of sufficient size.
32
j 25...80
r = 50 mm
m
m
Festo DGP(L)−...−B 0407f English
DGPL−...−GF
v = 1 m/s
max