Homeright Pro 5.0 Mode D'emploi page 13

Clean-Up
7
Unscrew cylinder locking knob and remove.
10
Make sure to completely remove all material
from the inside of the piston chamber by
scrubbing with the brush.
www.homeright.com
C820425D.f_MAN_Pro50-55_EN-FR-ES.indd 13
(continued)
8
Slide out cylinder housing. Remove and separate
piston and piston spring.
11
Use the brush to clean out the pick-up tube
port and the return port.
Be sure to clear the vent hole with a toothpick
or straightened paper clip or a vacuum can
build up in the container and cause damage to
the sprayer.
Never reassemble piston and cylinder without
lubricating first.
9
Remove any remaining residue from the
components with the cleaning brush and
the appropriate cleaning solution.
English
13
8/15/11 10:41 AM