Spray Tip Selection Chart; Important - Homeright Pro 5.0 Mode D'emploi

Using the Sprayer

Spray Tip Selection Chart

Using the proper spray tip/atomizer combination will help ensure a professional-looking job.
Size
0.6mm Medium Duty
0.8mm Heavy Duty Cone
0.8mm Heavy Duty Fan

Important

• Use appropriate breathing protection, eye protection, gloves, and clothing.
• Do not twist electrical cord. Do not place heavy objects on electrical cord. Keep electrical
cord away from heat and sharp objects. To avoid a tripping hazard, make sure cord is not in
a heavy traffic area. Do not use the cord if it is damaged.
• Should a low humming sound and/or irregular spray pattern occur while spraying, immediately
unplug and thoroughly clean and lubricate the sprayer. This will prevent the motor from
overheating and causing damage to the sprayer.
• If you stop spraying for 30 minutes or longer, before continuing, retest the spray pattern on scrap
board, newspaper or cardboard. If you are unable to adjust the spray pattern properly, the stain or
paint material may have started to dry. If this happens, clean and lubricate the sprayer.
• The small vent hole on the top of the cylinder housing must be kept clean. If the stain or paint
material should dry and clog the hole in the cylinder housing, your sprayer will not function
properly.
• If the spray pattern is still not correct, a thorough cleaning of the spray tip, atomizer valve
assembly, and pick-up tube may be needed. To maintain correct spraying, it may be necessary
to clean the unit during the project after dispensing five to nine gallons of paint or stain.
English
10
C820425D.f_MAN_Pro50-55_EN-FR-ES.indd 10
Duty Materials
Stains and Sealers,
Thinned Latex, Oil
Based Paints
Premium Latex
Premium Latex
Spray Tip
Customer
Service Retail
Part No. Part No. Color
C816694 C800790 Black
C816697 C800791 Black
C817036 C800792 Orange
Atomizer
Customer
Service Retail
Part No. Part No.
C816713 C800786
C816713 C800786
C817075 C800787
www.homeright.com
8/15/11 10:41 AM