Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Seat Height - Vermeiren Régina Mode D'emploi

2. Store accessories safely.
3. Place the chair in the luggage place.
4. If the chair and the passenger compartment is NOT separated, attach the
the chair securely to the vehicle. You can use the available safety belts in the vehicle.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
product (tilt back or sideways).
3.1

Tools

To set up the chair the following tools are needed.

Wrench set n° 17

Allen key set n° 6
3.2

Manner of delivery

The Vermeiren product shall be delivered with:

1 frame with shell chair and 4 wheels

1 wheel not mounted on the shell chair

1 legrest

Tray

Manual control, motor, power supply and cables

Tools

Manual

Accessories
Before use check if everything is included and that no products are damaged (example by
transport, ...).
3.3

Adjusting the seat height

L
WARNING:
Risk of injury – Make sure that no objects and or body parts are
caught between the adjustment systems.
L
WARNING:
Risk of injury – Adjusting can only be done by authorized people.
L
WARNING:
Risk of injury – Check that all screws have been properly fastened.
You can adjust the shell chair in 2 different seat heights (step: 25 mm) by adjusting the frame
and also adjust the seat height by changing the thickness of the seat cushion. The shell
chair must not be removed during this process.
Thickness seat cushion
60 mm
80 mm
100 mm
60 mm
80 mm
100 mm
Seat height
455 mm
475 mm
495 mm
480 mm
500 mm
520 mm
Table 2: Seat heights
Page 14
Regina
2013-09
frame of
Frame Position
Hole 1
Hole 1
Hole 1
Hole 2
Hole 2
Hole 2