Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Seat Height - Vermeiren D200 Mode D'emploi

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren D200 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.

Wrench set n° 7 to n° 22

Allen key set n° 3 to n° 8

Screwdriver n° 4 to n° 5

Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren D200 shall be delivered with:

1 frame with armrests, rear and front wheels (seat height of 500 mm)

1 pair footrests

Tools

Manual

Accessories
3.3

Adjusting the seat height

The Vermeiren D200 is adjustable in 3 seat heights by changing the wheels position. At each
height there is a different setting of the front and rear wheels.
L
WARNING:
The top hole of the axle plate is not intended for mounting the rear
axle - This hole is for mounting the drum brake.
Seat height
470 mm
500 mm
(Standard)
530 mm
Rear wheel
Hole 1 and Hole 2
Hole 2 and Hole 3
Hole 3 and Hole 4
Table 2: Seat heights
Page 16
D200
2014-08
Front wheel
Hole A
Hole B
Hole C