Installation And Adjustment; Tools; Manner Of Delivery - Vermeiren D100 Mode D'emploi

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren D100 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.

Wrench set n° 7 to n° 22

Allen key set n° 3 to n° 8

Screwdriver n° 4 to n° 5

Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren D100 shall be delivered with:

1 frame with armrests, rear and front wheels (seat height of 500 mm)

1 pair footrests

Tools

Manual

Accessories
Page 15
D100
2014-07