Display the firmware version number and the GUI installed.
Information
Manoeuvre counter
View the number of operator manoeuvres.
Total manoeuvres = Manoeuvres carried out since installation.
Partial manoeuvres = Manoeuvres carried out after the last one [Maintenance reset].
Information
Set up maintenance
Set the number of manoeuvres the operator can perform before a maintenance warning signal is generated. During a maintenance warning signal, the warning light
flashes rhythmically 3 + 3 times [Open].
Information
Maintenance reset
Reset the number of partial manoeuvres.
Information
Parameter reset
Restore factory settings except for the functions: [Radio decoding], [Motor type] and the settings related to travel calibration.
Information
Errors list
View the last 8 errors detected. The error list can be deleted.
Information
Change mode
FW version
Manoeuvre counter
Set up maintenance
Maintenance reset
Parameter reset
Errors list
Select the user for whom you want to change the command.
You can select a user without using the arrows, by sending a command from