CAME BKV15AGE Manuel D'installation page 66

Travel sensitivity
Adjust the obstruction detection sensitivity during boom travel.
Configuration
Gate travel settings
Slowdown sensitivity
Adjust the obstruction detection sensitivity during slowdown.
Configuration
Gate travel settings
Soft start
Set a slowdown of a few seconds after each opening and closing command.
Configuration
Gate travel settings
Partial opening point
Determine the gate partial opening point, as a percentage of total travel.
Configuration
Gate travel settings
Opening slowdown point
Set the opening slowdown start point, as a percentage of total travel.
During travel calibration, the opening slowdown point is automatically set to allow for a slowing space of 60 cm.
Configuration
Gate travel settings
Closing slowdown point
Set the closing slowdown start point, as a percentage of total travel.
During travel calibration, the closing slowdown point is automatically set to allow for a slowing space of 60 cm.
Configuration
Gate travel settings
Total stop
Stop the gate and exclude automatic closing. Use a control device to resume movement.
Configuration
Wired safety devices
Travel AST control
Slowdown AST control
Soft start
Part. open point
Opening slowdown point
Closing slowdown point
Total stop
Deactivated (Default)
Minimum
Average
Maximum
Customised
Deactivated (Default)
Minimum
Average
Maximum
Customised
Deactivated (Default)
On
10% to 100% (20% Default)
2% to 60% (Default 25%)
2% to 60% (Default 25%)
Deactivated (Default)
On