CAME BKV15AGE Manuel D'installation page 64

PROGRAMMING
Programming button functions
Esc < >
Icon key
The operator is in self-learning mode.
When the operator is in self-learning mode, AST Control is disabled.
To prevent the AST Control from being disabled, calibrate travel manually.
The operator detected an obstruction when the gate was moving to the right.
The operator detected an obstruction when the gate was moving to the left.
The operator detected two obstructions when the gate was moving to the right.
2
When the maximum number of detected obstructions has been reached, the operator stops and an error message shows on the display.
The operator detected two obstructions when the gate was moving to the left.
2
When the maximum number of detected obstructions has been reached, the operator stops and an error message shows on the display.
There is at least one programmed timer.
A programmed timer is running.
With the timer programmed for opening or partial opening, any given radio command will always allow opening. The wired commands
continue to operate normally.
Getting started
Once the electrical connections have been made, proceed with commissioning. Only skilled and qualified staff may perform this operation.
Make sure that there are no obstacles in the way.
Connect the device to the power supply and follow the wizard that appears on the display.
After powering up the system, the first manoeuvre is always to open the gate; Wait for the manoeuvre to be completed.
Press the ESC button or STOP button immediately in the event of any faults, malfunctions, strange noises or vibrations, or unexpected behaviour in the
system.
1 ESC button
The ESC button is used to perform the operations described below.
Exit the menu
Delete the changes
Go back to the previous screen
Stop the operator
2 < > buttons
The <> buttons are used to perform the operations described below.
Navigate the menu
Increase or decrease values
Ent
Open or close the operator
3 ENTER button
The ENTER button is used to perform the operations described below.
Access menus
Confirm a choice