CAME BKV15AGE Manuel D'installation page 65

Functions menu
Opening direction
Set the gate opening direction.
Configuration
Motor settings
Motor test
Check the gate opens in the right direction.
If the buttons do not execute the commands correctly, invert the gate opening direction.
Configuration
Motor settings
Travel calibration
Start the travel self-learning.
Configuration
Motor settings
Motor type
Set the type of gearmotor installed.
Configuration
Motor settings
Opening speed
Set the opening speed (percentage of maximum speed).
Configuration
Gate travel settings
Closing speed
Sets the closing speed (percentage of maximum speed).
Configuration
Gate travel settings
Opening slowdown speed
Set the slowdown speed during opening (as a percentage of the maximum speed).
If the slowdown speed is incorrectly set to a value higher than the opening speed by mistake, the parameter is automatically corrected.
Configuration
Gate travel settings
Closing slowdown speed
Set the slowdown speed during closing (as a percentage of the maximum speed).
If the slowdown speed is incorrectly set to a value higher than the opening speed by mistake, the parameter is automatically corrected.
Configuration
Gate travel settings
Opening direction
Motor test
Travel calibration
Motor type
Opening speed
Closing speed
Opening slowdown speed
Closing slowdown speed
To the left (Default)
To the right
The > button closes the gate
The < button opens the gate
Confirm? NO
Confirm? YES
BKV1500
BKV2000
BKV2500
40% to 100% (Default 100%)
40% to 100% (Default 100%)
15% to 60% (Default 50%)
15% to 60% (Default 50%)