CAME BKV15AGE Manuel D'installation page 72

New user
Register up to a maximum of 250 users and assign a function to each one.
The operation can be carried out by using a transmitter or another control device. The boards that manage the control devices (AF - R700 - R800) must
be inserted into the connectors.
Manage users
Remove user
Remove one of the registered users.
Manage users
Remove all
Remove all registered users.
Manage users
Radio decoding
Choose the type of radio coding for the transmitters enabled to control the operator.
If you choose the type of radio coding for the transmitters [Rolling code] or [TW key block], any transmitters with a different type of radio coding saved
previously will be deleted.
Manage users
Sensor type
Set the type of control device.
Manage users
Self-Learning Rolling
Save a new transmitter using an existing one without following the add new user procedure [New User].
Manage users
New user
Remove user
Remove all
Radio decoding
Sensor type
Self-Learning Rolling
Step-by-step
Sequential
Open
Partial opening
B1-B2 output
Choose the function to be assigned to the user.
Press ENTER to confirm.
Send the code from the control device.
Repeat the procedure to add other users.
Use the arrows to choose the number associated with the user you want to remove.
No.: 1 > 250
Alternatively, the control device associated with the user you want to remove can be
activated.
Press ENTER to confirm.
"CLr" will appear to confirm deletion.
Confirm? NO
Confirm? YES
Confirm? NO
Confirm? YES
All decodings
Rolling code
TW Key block
Confirm? NO
Confirm? YES
Keypad
Transponder
Deactivated (Default)
On