Troubleshooting - VALBERG WF 812 B W701T Consignes D'utilisation

C

Troubleshooting

Repair of your machine should be carried out by an authorised service company. If your
machine requires repair or if you cannot solve an issue with the information provided below,
then you should:
• Unplug your machine from the mains power supply.
• Turn off the water supply.
Fault
Your machine does not
start.
Your machine does not
intake water.
Your machine does not
discharge water.
Useful information
Possible cause
Machine not plugged in.
Fuses are faulty.
No mains power supply.
Start/Pause button not
pressed.
Programme dial 'stop' position. Turn the programme dial to the
The machine door is not
completely closed.
Water tap is turned off.
Water inlet hose may be
twisted.
Water inlet hose clogged.
Inlet filter clogged.
The machine door is not
completely closed.
Drain hose clogged or twisted.
Pump filter clogged.
Laundry is too tighly packed
together in the drum.
38
Troubleshooting
Plug machine in.
Replace the fuses.
Check mains power.
Press the Start/Pause button.
desired position.
Close the machine door.
Turn tap on.
Check water inlet hose and
untwist.
Clean water inlet hose filters. (*)
Clean the inlet filters. (*)
Close the machine door.
Check the drain hose, then
either clean or untwist.
Clean the pump filter. (*)
Spread your laundry in the
machine evenly.
EN