Italtecnica Brio TOP Manuel D'instructions page 21

↔
LAY O UT - DIMEN SIONS - ID ENTIFICATION
DESCRIPTION
Brio Top is an electronic control device for single phase electric pumps which enables automatic start-up
and shutdown of the pump, protecting it in the event of adverse operating conditions (failure of water
supply, motor overload, risk of ice).
Brio Top can operate on various systems:
- with a single electric pump,
- in a twin pump system in which the two alternate automatically
- in conjunction with a variable speed device (Sirio, Sirio Entry) for the set-up of constant pressure
pumping units.
Brio Top is programmable to operate on the basis of two different principles:
- mode P+F (pressure + flow) = in this mode, the pump is started up following a fall in pressure, when
the minimum set threshold is reached (Pmin); the pump operates until the water supply runs out and there
is zero flow through the device. In this condition the resulting pressure in the system will correspond to
the maximum pump head.
21
ГК Водная техника info@water-technics.ru (495) 771 72 72 www.water-technics.ru
Интернет-магазин info@wtpump.ru (499) 937 50 61 (800) 505 78 67 www.wtpump.ru