Publicité
Les langues disponibles
Les langues disponibles
Software Operation
20(E)
Great user manuals database on
Audio Monitor Select column
Selects the audio signal output to the ANALOG OUT connector.
• When you click Main, ATRAC-encoded main channel is output.
• When you click DCM, ATRAC-encoded concealment channel is output.
• When you click Input, input audio channel is output as is.
Measurement column
Select the unit for displaying the current position.
Current Position column
Displays the current recording position.
The contents of this column changes only during recording.
The contents of each box change according to the setting of Measurement
column as follows:
Information displayed in the Current Position column
Box title
Selection in the
Measurement column
Time Code
Film Length
Feet/Frame
Time From
Time
Start
Remaining
Feet/Frame
Remaining
Time
Time
Event column
Specify the start and stop position for the automatic recording.
TC Type box
Select Time Code or Feet/Frame for the unit for measuring events.
• When you select Time Code, events are measured in accordance with
input time code.
• When you select Feet/Frame, events are measured in accordance with
total length of transport from the beginning of the film.
Start Time box
Specify the recording start time if Time Code is selected for TC Type box.
Stop Time box
Specify the recording stop time if Time Code is selected for TC Type box.
UserManuals.info
Information
—
The current time code on the master
tape in hours, minutes, seconds and
frames.
The film length from the recording
starting point in feet and frames.
The time that has elapsed since the
start of recording in hours, minutes,
and seconds.
The remaining film length up to the
recording stopping point in feet and
frames.
The remaining time up to the recording
stopping point in hours, minutes and
seconds.
Publicité
