Publicité
Les langues disponibles
Les langues disponibles
Software Operation
Installing the SDDS Recorder System Software in Your Computer
..........................................................................................................................................................................................................
1) MMX Pentium is a trademark of Intel Corporation.
2) Microsoft Windows 95 and Microsoft Windows 98 are trademarks of Microsoft Corporation.
3) AT-GPIB, NI-488.2, and PCMCIA-GPIB are registered trademarks of National Instruments Corporation.
Great user manuals database on
Recommended minimum hardware configuration
The recommended minimum hardware configuration of your IBM PC/AT
or IBM-compatible personal computer is as follows:
CPU:
Memory:
Display:
Free space on the hard disk:
CD-ROM drive:
Floppy disk drive:
RS-232C port (COM port):
LPT port:
OS:
GP-IB unit and software (for LED optical power adjustment)
GP-IB interface:
GP-IB driver:
(These products are manufactured by National Instruments Corporation.)
Before installation
• Check the COM port and LPT port settings.
COM port:
LPT port:
To use other settings, contact your nearest Sony dealer or service
personnel.
• Make sure the following:
— COM1 and LPT1 ports are set to enable.
— LPT1 is set to EPP.
— The resources of COM1 and LPT1 do not conflict with other devices.
If these conditions are not met, recording error may result.
To check the COM port and LPT port settings
Use BIOS setup. For details, refer to the operating instructions supplied
with your personal computer or contact the manufacturer of the computer.
UserManuals.info
1)
MMX Pentium
266 MHz or higher
64 megabytes or more
800 × 600 high color or more
10 megabytes or more
One or more
At least one drive (2DD/2HD)
D-sub, 9-pin male
D-sub, 25-pin female supporting IEEE-1284 EPP
Microsoft Windows 95 or Microsoft Windows
2)
98
3)
AT-GPIB
or PCMCIA-GPIB
3)
NI-488.2
software for Microsoft Windows 95 or
Microsoft Windows 98, version 1.50
IRQ4, I/O PORT 3F8h, COM1
IRQ7, I/O PORT 378h, EPP mode, LPT1
3)
15(E)
Publicité
