How To Assemble - Hamilton Beach 34506 Mode D'emploi

How to Assemble

1. Ensure Gasket is properly
inserted into Lid. Align Gasket
behind metal ring and push
Gasket firmly into place.
5. Probe Hole Cover or Stopper of Temperature Probe must be secured
in place when pressure cooking to prevent steam from escaping. Insert
Probe Hole Cover on the underside of Lid up into Probe Hole. NOTE: See
page 10 for How to Use Temperature Probe.
6. On top of Lid, place Steam Release Valve on Valve Stem. Leave in open
position ( ).
2. On underside of Lid, screw Stem
Cap onto Steam Release Valve
Stem. Push down Steam Release
Valve Cover over Stem Cap. Ensure
that Steam Release Valve and Float
Valve are clean and free of debris.
3. Install Condensation Collector at
back of Cooker by aligning top of
Collector with guides on Cooker
and snap into place.
7. Place Lid on Cooker by matching
arrow icon on Lid with unlock
icon on Base. Rotate Lid
clockwise to lock. Arrow icon and
lock icon should align.
4. Place Cooking Pot into Base, and
add a minimum 1 cup liquid to
Cooking Pot, then add food.
8. Turn Steam Release Valve to
closed position ( ).
NOTE: Do not carry Pressure
Cooker by Lid Handle. This Handle
is designed for easy opening and
locking Lid.
7