Videotec ULISSE EVO Manuel D'instructions page 10

4 Identification
4.1 Product Overview
The product consists of 3 parts:
1. Sunshield.
2. Body.
3. Base.
Fig. 1
8
4.2 Product marking
01
Fig. 2
The label shows:
02 • Model identification code.
• Supply voltage (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Protection degree (IP).
• Serial number.
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
03
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
The product has a label applied in
compliance with CE marking.
MNVCEVO_1947_EN