DeWalt PA3500 Traduction De La Notice D'instructions Originale page 32

English
1 Safety notes
Please read the safety information
carefully in order to ensure a safe and
proper operation of the device. Retain
the operating instructions until the
product is disposed of.
1.1 Intended use
The Power Actuated Tools are intended for
setting nails and must be used according to
the information in this user manual. Powder
Actuated Tools are not "toys" and require
prudent, responsible and careful handling.
Powder Actuated Tools are intended for
professional use and are subject to certain legal
provisions.
Responsibilities of the employer, for example:
– Manufacturer's recommended intervals
for routine inspection and maintenance:
every 2 years, but no later than every
3,000 settings, unless shorter intervals are
prescribed by law.
– Repairs must be made at authorized
technical facilities.
– Collection and safe disposal of "mis¿ red
cartridge"
– Safe storage of the Power Actuated Tools
(unloaded) in the locked tool box a the
cartridge strips (separately from each
other).
– Provisioning and ensuring the usage of
protective equipment, see chapter 1.4
"Protective equipment"
The stud gun is to be operated only by trained
personnel over 18 years old, or by trainees over
16 years old in the presence of a supervisor.
The operator must not be fatigued or under the
inÀ uence of alcohol, medication or drugs.
Suitable materials to use as a base, for example
– Concrete of normal strength
– Steel
Materials that are unsuitable and should not be
used as a base, for example:
– Materials that are too soft or too thin
– Materials that are too brittle, such as glass
or ceramic
32
All manuals and user guides at all-guides.com
–
–
–
Misapplications, misuse or "fooling around"
may cause lethal injuries and serious property
damage. This particularly includes
–
–
–
–
You may only use cartridge strips, shooting
nails and accessories produced by the Powder
Actuated Tool manufacturer, see chapter 2.2
"Cartridge strips" and chapter 2.3 "Shooting
nails".
Other applications and uses as well as
modi¿ cations to the device, additions to the
device or conversions as well as maintenance
operations and repairs performed by yourself
can impair the safety, reliability and proper
functioning of the device to a signi¿ cant extent
and void any warranty claims.
1.2 Safety labels on the device
The device may only be used if all safety labels
on the Powder Actuated Tool are both complete
and legible.
Materials that are too hard, such as
hardened steel
Hollow block masonry, perforated brick
masonry
Cast iron, plastic, marble, gypsum
plasterboards
The overriding of safety mechanisms
Misusing the device as a "¿ rearm"
Misusing the device as a hammer or similar
tool
Never use the cartridge strips in ¿ rearms or
attempt to open them.
Read the instruction manual prior to
using the device
Wear safety goggles
Wear hearing protection
Wear a safety helmet