Removing The Unit; Precautions - Sony MEX-5DI Mode D'emploi

Removing the unit

1
Remove the front cover
1 Press the clip inside the front cover
with the release key (supplied), and
pry the front cover free.
Note
To protect the surface of the unit, insert thin cloth
between the release key and the unit when inserting
the release key.
2 Repeat step 1 on the left side.
The front cover is removed.
2
Remove the unit
1 Use the release key to push in the
clip on the left side of the unit, then
pull out the left side of the unit until
the catch clears the mounting.
2 Repeat step 1 on the right side.
3 Slide the unit out of the mounting.
Note
Be sure to close the front panel before removing the
unit. Doing so with the front panel open may cause
injury to your fingers.
46
Release key
(supplied)

Precautions

• If your car was parked in direct sunlight, allow
the unit to cool off before operating it.
• Power antennas will extend automatically
while the unit is operating.
• Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
• Do not drop water or foreign objects on the disc
tray as a fire or malfunction can occur.
If you have any questions or problems
concerning your unit that are not covered in this
manual, please consult your nearest Sony dealer.
Moisture condensation
On a rainy day or in a very damp area, moisture
condensation may occur inside the lenses and
display of the unit. Should this occur, the unit
will not operate properly. In such a case, remove
the disc and wait for about an hour until the
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks
onto the unit or discs.
Notes on CD lens
• Do not touch the lens in the disc tray.
• Do not use a commercially available lens
cleaner.
Notes on LCD display
• Do not push the LCD display strongly. It may
cause injury or damage the display.
• Bright points of light (red, blue, or green) or
black dots may appear on the LCD display.
This is not a malfunction. The LCD is made
with high-precision technology and more than
99.99 % of the picture element is intact.
However, tiny elements of the picture may
show the above symptoms.