Samsung POWERbot SR1AM70 Serie Guide D'utilisation page 28

Samsung Smart Home App
Samsung Smart Home App is only applicable to models supported with Wi-Fi function.
Preparing the network
Setting up the wireless router
fThis product supports only DHCP(Dynamic Host Configuration Protocol). Please check if the DHCP
server option function of a wireless router is activated.
fThe supported types of authorization/encryption of the wireless router are WEP-OPEN, WPA-PSK/
TKIP and WPA2-PSK/AES 801.11n.
– WPA2-PSK/AES is recommended to be used.
fThe quality of connection of the wireless network may be influenced by the surrounding wireless
environment.
fWhen your Internet service provider has permanently registered an MAC address (a unique
identification number) of your PC or modem, your POWERbot may be unavailable to be connected to
the Internet. Ask your Internet service provider about the procedure to connect an apparatus other
than a PC to the Internet.
fIf your internet service provider requires your ID or password to connect to the internet, your
POWERbot may not be able to connect to the internet. In this case, you must enter your ID or
password when connecting to the internet.
fThe connection to the Internet may be impossible because of issues of firewall. Ask your Internet
service provider for resolving the issue.
fSome wireless routers may convey an abnormal Domain Name Server (DNS) address even if the
Internet is not connected. In this case, inquire the provider of the pertinent wireless router and your
Internet service provider.
fIf you still cannot connect to the Internet even after trying the procedure informed by your Internet
service provider, please ask an agency or service center of Samsung Electronics.
Note
f Please refer to the user manual of the pertinent wireless router without access problems.
f Samsung POWERbots support only Wi-Fi 2.4 Ghz.
f Samsung POWERbots support the communication protocol of the methods of IEEE
802.11b/g/n and Wi-Fi Direct. (Samsung Electronics recommends to use IEEE 802.11n.)
f A wireless router with no authorization of Wi-Fi may be unavailable to be connected to the
POWERbot.
f When the power is supplied and the POWERbot is docked on the docking station, the
POWERbot will be connected to the server and then check if there is software updates. If
there is the latest software, it will be automatically downloaded and updated.
f If "UP" is displayed on the display panel while the POWERbot is charging, it means that the
update is in progress. Please wait for completing the rebooting.
1_VR7000_EN_DJ68-00763C-02_USA.indd 28
ENGLISH-28
2017-02-23 오전 12:27:03