Publicité
Les langues disponibles
Les langues disponibles
About the boundary markers
Boundary
markers
where a raised spot is below 1.9 in(5 cm)
boundary
markers
where a threshold is above 0.6 in (1.5 cm)
Using Energy-saving mode
You may select the Energy-saving mode to save energy during battery charging. Energy-saving mode
turns off all functions except battery charging. It reduces the power consumption while you are away
from home for an extended period of time.
How to select or cancel
Note
f If you select the Auto/Max/Manual clean mode or press Point cleaning button, the Energy-
saving mode will be cancelled.
f During the Energy-saving mode, setting the schedule will cancel the Energy-saving mode.
– If you select the Energy-saving mode after setting the schedule, the schedule will not be
cancelled.
f If the power of the docking station is off, the Energy-saving mode will be cancelled.
1_VR7000_EN_DJ68-00763C-02_USA.indd 17
To prevent the POWERbot from entering the following areas, attach
the boundary markers on the floor in the
about 5.9 in (15 cm).
About 5.9 in
(15 cm)
About 1.9 in
(5 cm)
Above 0.6 in (1.5 cm)
Press for 5 sec.
ENGLISH-17
shape at an interval of
Boundary
markers
where there is a slide, swing, fireplace or any
flammable substance or moisture.
Boundary
markers
where there is risk of falling such as stairs,
porches or guardrails.
Displayed icon
✻ ✻ About 3
seconds later,
the previous
indicator will
appear.
About 5.9 in (15 cm)
<Only SR1AM7010UW
series>
Blinking Blinking
2017-02-23 오전 12:26:55
Publicité
