Samsung POWERbot SR1AM70 Serie Guide D'utilisation page 14

Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the
• When POWERbot is not used for 30 min.;
SR1AM70✴✴U✴ / SR2AM70✴✴U✴ series: Turns to energy-saving mode.
WARNING
SR1AM70✴✴W✴ / SR2AM70✴✴W✴ series: Automatically returns to the docking
Recharging/Energy-saving mode
fRecharging
You can command POWERbot to recharge at the docking station
automatically while it is cleaning by pressing this button.
fEnergy-saving mode
Refer to page 17.
1_VR7000_EN_DJ68-00763C-02_USA.indd 14
button for more than 3 seconds
ENGLISH-14
station to be charged.
Starting Auto clean mode
Press and release this button. The POWERbot moves
and automatically cleans the set areas only once.
✻ ✻ Stop cleaning: Press and release the
Using Spot clean mode
The POWERbot cleans a localized area intensely.
button
2017-02-23 오전 12:26:53