Technical Data - Scheppach AB1500X Traduction Des Instructions D'origine

• Remove the plug from the socket and/or remove
the battery before setting the device, changing
accessories or putting the device away. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of
children and Do not let people use the device
if they are not familiar with it or if they have
not read these instructions. Power tools are
dangerous in the hands of untrained users.
• Maintain the electric tool with care. Check
whether moving parts function properly and
do not get stuck and whether parts are broken
or are damaged and thus adversely affect the
electric tool function. Have damaged parts
repaired before using the device. Many accidents
are caused by poorly maintained power tools.
• Always keep your cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
Service
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for hammers
• Wear hearing protection. Excessive noise can
result in a loss of hearing.
• Use the additional handles provided with the
device. Loss of control can lead to injuries.
• When performing work during which the tool
attachment can meet with concealed power
lines or its own mains cable, hold the device by
the insulated gripping surfaces. Contact with a
live power line can also electrify metal device parts
and lead to an electric shock.
m WARNING! This power tool generates an
electromagnetic field during operation. This field
can impair active or passive medical implants under
certain conditions.
20 | GB
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
Keep these safety instructions in a safe place.
Residual risks
Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and
construction of this power tool:
• Lung damage if suitable dust protection mask is not
worn.
• Hearing damage if suitable hearing protection is not
worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of time
or if it is not properly operated and maintained.

6. Technical data

Mains voltage
Power consumption
Impact force
Stroke rate
Werkzeugaufnahme
Protection class
Weight
Danger!
Noise and vibration
The noise and vibration levels have been determined
in accordance with EN 60745.
Sound pressure level L
Uncertainty K
Sound power level L
Uncertainty K
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Total vibration emission values (vector sum of three
directions) determined according to EN 60745.
www.scheppach.com
230 - 240 V~ 50 Hz
pA
pA
WA
WA
1300 W
20 Joule
4100 bpm
SDS-MAX
II
5.5 kg
76.2 dB(A)
2.81 dB(A)
96.2 dB(A)
2.81 dB(A)