Step 3: Tv And Video Component Hookups - Sony AVD-C700ES Mode D'emploi

Step 3: TV and Video Component Hookups

Required cords
S Video cord for connecting a TV monitor
Audio/Video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
Note
When only the receiver is set to "DVD" mode or the signal is input to the TV/SAT (COMPONENT VIDEO IN)
jacks, the signal is output from the COMPONENT VIDEO OUT jacks.
Tip
When using the COMPONENT VIDEO OUT jacks (Y, P
the Video jacks, your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y,
P /C , P /C ). If your TV accepts progressive format signals, you must use this connection and set
B B R R
"COMPONENT OUT" to "PROGRESSIVE" in "SCREEN SETUP" (page 76).
To the
MONITOR (S VIDEO OUT or VIDEO OUT) jack
VIDEO 1 or VIDEO 2 (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks
TV/SAT (COMPONENT VIDEO IN, S VIDEO IN, or VIDEO IN/AUDIO L/
R IN) jacks
Yellow (Video)
White (L/audio)
Red (R/audio)
/C , P /C ) instead of the S Video jacks or
B B R R
continued
US
19