Using Other Units - Sony AVD-C700ES Mode D'emploi

Notes
• Depending on the VCR, you may not be able to
control your VCR, or use some of the buttons above.
• To operate a DVD player, press FUNCTION and
select "DVD" using Cursor key, and then push
Cursor key to change the mode of the receiver to
DVD.
68 US

Using Other Units

You can use VCRs or other units connected to
the VIDEO1, TV/SAT, or VIDEO2 jacks. Refer
to the operation manual supplied with the other
unit for further information on its operation.
FUNCTION
Press FUNCTION and select "VIDEO1,"
"VIDEO2," "TV/SAT," or "MD/DAT" using
Cursor key, and then push Cursor key.
When you push Cursor key after selecting the
unit you want to use, the mode of the receiver
changes and the currently selected unit's name
appears in the front panel display.
Tip
You can also select the mode using FUNCTION –/+ on
the receiver. Each time you press FUNCTION –/+, the
mode of the receiver changes in the following
sequence.
DVD t VIDEO1 t VIDEO2 t TV/SAT t
MD/DAT t TUNER t DVD...
Cursor key