Using The Video Or Other Unit - Sony AVD-S50 Mode D'emploi

Controlling the satellite receiver
Press SAT.
Each time you press SAT, the controllable
source on the remote changes as follows:
The receiver (AVD-S50)
(SETUP indicator flashes once.)
Y
Your satellite receiver
(SETUP indicator flashes twice.)
You can control your satellite receiver using
the buttons below.
By pressing You can
AV [/1
Turn the satellite receiver on or
off.
DISPLAY Change the display.
TIME Return to the previous channel.
Number buttons Select the channel.
ENTER Confirms the selected channel .
AUDIO Change the audio.
SUBTITLE Display the subtitle or not.
CH +/– Change the channel.
TOP MENU/ Display the program guide.
GUIDE
AV MENU Display the menu.
DVD DISPLAY Change the display.
O RETURN
Return to the previous display
in the program guide or menu.
C/X/x/c/
Select the item in the program
ENTER guide or menu.
Note
Depending on the satellite receiver, you may not be
able to control your satellite receiver or to use some
of the buttons above.
Using the Video or other
Unit
You can use VCRs or other units connected
to the t EURO AV INPUT (FROM
VIDEO), DIGITAL, or ANALOG jacks.
Refer to the operation manual supplied with
the unit for further information on the
operation.
FUNCTION
Press FUNCTION repeatedly until the
desired source that you connected to
the receiver appears on the front panel
display.
Each time you press FUNCTION, the mode
of the receiver changes in the following
sequence.
DVD t VIDEO t ANALOG t
DIGITAL 1 t DIGITAL 2 t
DIGITAL 3 t TUNER t DVD...
GB
61