Sony AVD-C700ES Mode D'emploi page 79

Tip
Surround speaker position and height is
designed specifically for CINEMA STUDIO
EX mode.
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
3m
(10ft)
3m
(10ft)
3m
(10ft)
3m
(10ft)
Be sure to change the value in the Setup Display
when you move the speakers.
FRONT
Front speaker distance from the
3 m/10 ft
listening position can be set in 0.3
metre (1 ft) increments from 0.9 to 6.9
metres (3 to 23 ft).
CENTER Center speaker distance can be moved
3 m/10 ft
up to 1.5 metres (5 ft) forward closer
to your listening position from the
front speaker position, in 0.3 metre (1
ft) increments.
SURROUND Surround speaker distance can be
3 m/10 ft
moved up to 4.5 metres (15 ft) closer
to your listening position from the
front speaker position, in 0.3 metre
(1 ft) increments.
SURROUND
Surround back speaker distance can
BACK
be moved up to 4.5 metres (15 ft)
3m/10ft
closer to your listening position from
the front speaker position, in 0.3 metre
(1 ft) increments.
Notes
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
3m
(10ft)
3m
(10ft)
• Do not place the surround speakers farther away from
your listening position than the front speakers.
x LEVEL
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to "ON"
for easy adjustment.
CENTER
Adjusts the level of the center
0 dB
speaker (–10 dB to +10 dB, 1 dB
steps).
SURROUND
Adjusts the level of the surround
LEFT 0 dB
speakers (–10 dB to +10 dB, 1 dB
SURROUND
steps).
RIGHT 0 dB
SURROUND
Adjusts the level of the surround
BACK 0 dB
back speaker (–10 dB to +10 dB,
1 dB steps).
SUBWOOFER
Adjusts the level of the subwoofer
0 dB
(–10 dB to +10 dB, 1 dB steps).
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set "TEST
TONE" to "ON" for easy adjustment.
FRONT
Adjusts the balance between the front left
CENTER
and right speakers. The center position is
shown as "---". (You can adjust from the
center, 6 steps left or right.)
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the receiver, or
press VOLUME +/– on the remote.
x TEST TONE
The speakers will emit a test tone to adjust
"LEVEL" and "BALANCE."
OFF
The test tone is not emitted from the
speakers.
ON The test tone is emitted from each speaker
in sequence. When "BALANCE" is
selected, the test tone is emitted from both
left and right speakers simultaneously.
When "LEVEL" is selected, the test tone is
emitted from only the speaker that you are
adjusting.
continued
US
79