Step 3: Tv And Video Component Hookups - Sony AVD-S50ES Mode D'emploi

Step 3: TV and Video Component Hookups

Required cords
S Video cord for connecting a TV monitor
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
z
When using the COMPONENT VIDEO OUT jacks (Y, P
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, P
accept progressive format signals, you must use this connection and set "COMPONENT OUT" to
"PROGRESSIVE" in "SCREEN SETUP" (page 67).
Notes
• When you select VIDEO using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the VIDEO (S VIDEO/ANALOG L/R OUT) jacks.
• When you use the Video line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
• When the mode of the receiver is not set to "DVD," no signal is output from the COMPONENT VIDEO OUT
jacks.
• When the mode of the receiver is set to DVD and "INTERLACE" is selected in "SCREEN SETUP," the signal is
output from the MONITOR or COMPONENT VIDEO OUT jacks.
• When the mode of the receiver is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the
signal is output only from the COMPONENT VIDEO OUT jacks.
US
22
White (L/audio)
Red (R/audio)
To the
MONITOR (S VIDEO OUT) jack
VIDEO (S VIDEO/ANALOG L/R IN/OUT) jacks
TV/SAT (S VIDEO/ANALOG L/R IN) jacks
White (L/audio)
Red (R/audio)
/C P C ) instead of the S Video jacks
B B, R/ R
/C
B B
, P /C ). If your TV
R R