Step 3: Tv And Video Component Hookups - Sony AVD-S500ES Mode D'emploi

Step 3: TV and Video Component Hookups

Required cords
S Video cord for connecting a TV monitor
Audio/Video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
Note
When the receiver is not set to "DVD" mode, no signal is output from the COMPONENT VIDEO OUT jacks.
Tip
When using the COMPONENT VIDEO OUT jacks (Y, P
the Video jacks, your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y,
P /C , P /C ). If your TV accepts progressive format signals, you must use this connection and set
B B R R
"COMPONENT OUT" to "PROGRESSIVE" in "SCREEN SETUP" (page 69).
To the
MONITOR (S VIDEO OUT or VIDEO OUT) jack
VIDEO 1 or VIDEO 2 (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks
TV/SAT (S VIDEO IN or VIDEO IN/AUDIO L/R IN) jacks
Yellow (Video)
White (L/audio)
Red (R/audio)
/C , P /C ) instead of the S Video jacks or
B B R R
continued
US
19