Playing Discs - Sony AVD-S500ES Mode D'emploi

Playing Discs

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operation details supplied with your
disc.
STANDBY indicator
FUNCTION –/+
POWER
POWER
STANDBY
SOUND FIELD
2CH A. F. D. MODE DISPLAY
TUNER/PRESET FUNCTION
PHONES
Disc tray
Connect
headphones
DVD
H
1
Turn on your TV.
2
Switch the input selector on the TV to
this receiver.
3
Press POWER on the receiver.
The receiver enters standby mode and the
STANDBY indicator lights up in red.
4
Z N x
5
VOLUME
After following Step 5
Adjust the
volume
Depending on the disc, a menu may appear on
the TV screen. You can play the disc
"/1
interactively by following the instructions on the
menu. (DVD: page 26), (VIDEO CD: page 26).
To remove the disc
Press Z on the receiver or OPEN/CLOSE on the
remote. "OPEN" appears in the front panel
display. Remove the disc after the disc tray
slides out from the receiver.
To turn on the receiver
x
Press POWER on the receiver. The receiver
OPEN/CLOSE
enters standby mode and the STANDBY
indicator lights up in red. Press "/1 on the
remote. The receiver turns on and the
STANDBY indicator turns off. In standby
mode, the receiver also turns on by pressing Z,
FUNCTION –/+ or N on the receiver or by
pressing DVD, OPEN/CLOSE or H on the
remote.
Press Z on the receiver or OPEN/
CLOSE on the remote, and place a disc
with the label side up on the disc tray.
The receiver automatically turns on and the
STANDBY indicator turns off.
When you play an 8 cm disc, place
it on the inner circle of the tray
Press H.
The disc tray closes, and the receiver starts
playback (continuous play). Adjust the
volume on the receiver.
continued
US
23