Sony AVD-S500ES Mode D'emploi page 60

By pressing
TV VOL +/–
TV CH +/–
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
Controlling satellite receivers
with the remote
RM SET UP
Number
buttons
1
Press RM SET UP and AV [/1
simultaneously.
The RM SET UP indicator lights up.
2
Press TV/SAT.
3
Enter your Satellite receiver's
manufacturer code (see the table)
using the number buttons.
4
Press ENTER.
When registration is completed, the RM
SET UP indicator flashes twice.
60 US
You can
adjust the TV volume.
change the TV channel.
AV ?/1
TV/SAT
ENTER
Code numbers of controllable
satellite receivers
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your satellite receiver.
Manufacturer Code number
SONY 801,802,803,804
JERROLD/G.I. 806,807,808,809,810,811,
812,813,814
PANASONIC 818
RCA 805,819
S.ATLANTA 815,816,817
Controlling the satellite receiver
Press TV/SAT.
Sources that can be controlled by the remote
change depending on the setting of TV/SAT.
You can control your satellite receiver using the
buttons below.
By pressing You can
AV [/1
Turn the satellite receiver on or
off.
JUMP Jump
Number buttons Select a channel.
ENTER Confirm the selected channel.
AUDIO Change the audio.
CH +/– Change channels.
TOP MENU/ Display the program guide.
GUIDE
AV MENU Display the menu.
DVD DISPLAY Turn the display on or off.
O RETURN/EXIT Return to the previous display
in the program guide or menu.
C/X/x/c/ ENTER Select the item in the program
guide or menu.
Notes
• Depending on the satellite receiver, you may not be
able to control your satellite receiver or to use some
of the buttons above.
• To operate a DVD player, press DVD, and then
change the mode of the receiver to DVD.