Other Operations; Controlling Other Units With The Supplied Remote - Sony AVD-S500ES Mode D'emploi

Other Operations

Controlling Other Units
with the Supplied Remote
By adjusting the remote signal, you can control
your TV, satellite receiver or VCR with the
supplied remote.
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Tip
You can set the code number for your TV or satellite
receiver separately.
Controlling TVs with the
remote
TV ?/1
RM SET UP
Number*
buttons
TV CH +/–
TV VOL +/–
1
Press RM SET UP and AV [/1
simultaneously.
The RM SET UP indicator lights up.
2
Press TV [/1.
The RM SET UP indicator flashes once.
3
Enter your TV manufacturer code (see
the table) using the number buttons.
4
Press ENTER.
When registration is completed, the RM
SET UP indicator flashes twice.
If registration is incomplete, the RM SET
UP indicator rapidly flashes 4 times.
* Use the number buttons only to enter the code
number of controllable TVs.
Code numbers of controllable
TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Manufacturer
SONY
AIWA
DAEWOO
FISHER
GOLDSTAR
GRUNDIG
HITACHI
ITT/NOKIA
JVC
MAGNAVOX
AV ?/1
MITSUBISHI/MGA 503,519,544
NEC
PANASONIC
PHILIPS
PIONEER
RCA/PROSCAN
ENTER
SAMSUNG
SANYO
SHARP
TELEFUNKEN
THOMSON
TV/VIDEO
TOSHIBA
ZENITH
Controlling the TV
You can control your TV using the buttons
below.
By pressing
TV [/1
TV/VIDEO
Code number
501,502
501,502
504,505,506,507,515,544
508
503,511,512,515,534,544
517,534
513,514,515,544
521,522
516
503,518,544
503,520,544
509,524
515,518
509,525,526,540
510,527,528,529,544
503,515,531,532,533,534,544
508,545,546,547
535
523,536,537,538
530,537,539
535,540,541
542,543
You can
Turn the TV on or off.
Switch the TV's input source
between the TV and other input
sources.
continued
US
59