koban KPF-03 Mode D'emploi page 32

KPF-03
Mini AC Leakage Current Tester
Data Hold
To freeze the current reading on the LCD, press the "Hold Backlight" key. The word HOLD will appear on the LCD while
the meter is in the Data Hold mode. To release the Data Hold function and return the meter to normal operation, press the
"Hold Backlight" key again. The word HOLD will switch off.
Backlight display
Press and hold the "Hold Backlight" key for more than 2 seconds to turn on the backlight. This will also activate the Data
Hold function. To release the Data Hold function and return the meter to normal operation, press the Data Hold key
momentarily.
To turn off the backlight, press and hold the "Hold Backlight" key for more than 2 seconds.
Max Hold
To freeze the max reading on the LCD,press the "Max" key,the word Max will appear on the LCD while the meter is in the
Max hold mode,To release the meter to normal operation,press the "Max"will Switch off.
AUTO POWER OFF
The auto off feature will turn the meter off after 15 minutes.
Battery Replacement
1)When the low battery symbol appears on the LCD the batteries must be replaced.
2)Power down and remove the rear battery compartment Phillips screw.
32 www.grupotemper.com