koban KPF-03 Mode D'emploi page 30

KPF-03
Mini AC Leakage Current Tester
This meter has been designed to be safe in use, but the operator must use caution in its operation. The rules listed below
should be carefully followed for safe operation.
1.NEVER apply voltage or current to the meter that exceeds the specified maximum:
2.USE EXTREME CAUTION when working with voltages greater than 25VAC rms.
These voltages are considerd a shock hazard.
3. NEVER operate the meter unless the back cover and the battery/fuse door are in place and fastened securely
Input Limits
FUNCTION Maximum Input
200 mA 200 mA
AC Current 2 A 2 A
200 A 200 A
Operation
AC Current Measurements
WARNING: To avoid electric shock, disconnect the test leads from the meter before making current measurements.
1, Set the Function switch to the desired current range
2, Press the jaw trigger to open the clamp jaws and clamp around the conductor ensuring they're fully enclosed by the clamp
30 www.grupotemper.com