Split Screen; Cleaning & Maintenance; Disposal Instructions - Renfert EASY view+ 3D Guide De Démarrage Rapide

Split screen

The split screen feature allows an additional image to be displayed on the monitor.
en With the split screen function, inserted images are only displayed in 2D.
♦ Open split screen main menu:
⇒ press the right mouse button until the split screen main menu appears.
Operation and navigation in the split screen menus:
⇒ Roll mouse wheel
♦ Select menu item / sub-menu
⇒ Click left mouse button
♦ Select menu item / sub-menu
⇒ Click right mouse button
♦ returns to the previous menu level
⇒ Click and hold the right mouse button
♦ Close the split screen menu.
⇒ Exit
♦ Close the split screen menu.
As long as a split screen menu is open, the system settings (2D / 3D, 4x/ 15x / 20x zoom, object mode) cannot
be changed.
For details to the split screen function, please refer to the user instruction in the internet.
Monitor
Details on the monitor can be found in the instructions for use in the internet. Renfert recommends not changing the
factory settings of the monitor as the basic settings for the EASY view+ 3D.
Cleaning / Maintenance
The device does not contain any internal parts that require maintenance.
Wipe the housing, including the lighting, only with a slightly moistened cloth. Do not use disinfectant or cleaning
agents or compressed air.
Clean monitor only with a dry cloth. Because of the natural product used, the desk pad may build an oily coat. It is
possible to wipe it off with a grease dissolving cleaning agent such as a commercially available dishwashing liquid.
CAUTION!
Risk of getting burned on hot lenses of the lighting!
Clean only when the unit is switched off and has cooled down.
Removing the cable from the cable duct / guiding it into the cable duct
See images at the end of this manual.
Spare parts
You can find components subject to wear and the spare parts on the spare part list in the internet at
www.renfert.com/p918.
Enter the following item number: 2400 3000.
The components excluded from the warranty (such as consumables or parts subject to wear and
tear) are marked on the spare part list.
Serial number and date of manufacturing are shown on the type plate of the unit.
Troubleshooting
Details can be found in the instructions for use in the internet.

Disposal Instructions

Within the European Union units with this symbol should not be disposed of in unsorted domestic waste.
For more information regarding proper disposal please apply at your local authorities.
- 6 -
Fig. 1
Subject to alteration